THE WENTWORTH POINT MARINAS PROJECT.
We are proud to announcement our collaboration with one of Sydney’s largest developers. The Wentworth Point Marinas Project is made up of four apartment complexes with a combined worth of US$308.5 Million which will completely transform Wentworth Points foreshore.
terra infrastructure was in on the ground floor, providing a cost effective lightweight sheet pile in the SCH-5, which was used for the basements cantilevered walls and lift pits. The STU-8 and STU-1000 was also utilized for its ability to re-drive over and again. When it came to installation, Billbergia required a MÜLLER MS-7 HFB excavator mounted vibro hammer along with a gooseneck to fit on to their 20 ton excavator in order to drive these sheets. As 8m was the regular sheet length, terra infrastructure fabricated a gooseneck to give the hammer the required clearance.
you might also be interested in
-
Back anchoring steel sheet pile wall with micropiles
On the north bank, an armored steel sheet pile wall was to be placed in front of the existing seawall over a length of around 400 meters and tied back at specified points.
To the post -
Demountable flood protection with the terra stop log system
A reinforced concrete plinth and a demountable flood protection wall will prevent flood-waters from threatening the building in future.
To the post -
Stokes Hill Wharf Fender Piles
terra infrastructure supplied both our müller MS32HFV vibro and BSP CX110 impact hammer to Advance Civil and Engineering to install 22 x 32m long fender piles on their Stokes Hill Wharf upgrade.
To the post