SCH SECTIONS.

OUR SCH SHEET PILES ARE LIGHT HAT SHEET PILING

The cold-rolled SCH range from thyssenkrupp offers a light weight, economical solution to meet the needs of today’s market. The SCH sections are produced with a hook connecting clutch, reliable and suitable for shoring or trenches, shafts and construction pits. The SCH sections are manufactured to comply with EN 10249 cold rolled sheet piles.

APPLICATIONS

• Short and light loaded walls
• Deadman walls
• Retaining walls for residential buildings & elevator pits
• Dyke improvements, flood irrigation and erosion prevention
• River bank protection

ADVANTAGES

• Very light, extended width, reduced thickness
• Efficient pile driving
• Neutral axis of each pile is same as the sheet piling wall
• Can be handled and installed with small hammer or rigs
• Hat type sheet piling will help to cut down the project costs

Technical Data

SCZ SECTIONS.

The cold-rolled SCZ range from thyssenkrupp have a large width which provides superb installation performance and they have an extremely competitive section-modulus to mass ratio. They also have increased the inertia for reduced deflection. The SCZ sections are manufactured to comply with EN 10249 cold rolled sheet piles

We can supply sections with a section modulus of up to 5230 cm³/m. Special requirements for your project can be discussed with our team.

APPLICATIONS

• Port construction
• Deep foundation
• Intermediary piles for combined walls

ADVANTAGES

• Higher section modulus
• Interlock on both sides of the neutral wall axis
• Economical weight to section modulus ratio
• Cost saving on sheet piling installations

Technical Data