KRINGS PILING FRAME ELEMENT BLU.
The BLU represents a low-deformation, universally applicable and economical shoring variant. It is particularly suitable for use in inner-city areas with crossing lines. The piling frame element, which serves as the upper guide for the trench sheeting to be inserted vertically into the floor, can be used when laying gas and water pipes and other house connections. The planks are lowered by low-vibration pressing with the excavator bucket during advance soil excavation.
Installation and presetting of the element are carried out in the same way as for edge-supported shoring systems. The support claws of the piling frame element can be used in two variants: for use in the excavation pit they are mounted on top of the element, for use outside the excavation pit they are mounted on the bottom of the element.
SPECIFICATIONS
- Shoring length: 2.41 m
- Height of piling frame element: 0.72 m
- Pipe culvert length: 2.17 m
- Insertion depth: up to 2.40 m
- Weight box: 473 kg
- Shoring width: variable
- Recommended installation depth: up to 3,00 m
ADVANTAGES
- Small version of the DKU for inner-city areas with crossing lines
- Support claws can be used in two position
KRINGS PILING FRAME ELEMENT DKU 2.27 & 3.81.
The KRINGS piling frame element Universal (DKU) was developed taking into account practical and procedural construction site boundary conditions and represents a low-deformation, universally applicable and economical shoring method. It is particularly suitable for use in inner-city areas with crossing pipelines as a supplement to large-area steel shoring. The piling frame element is installed and pre-set in the same way as the edge-supported KRINGS shoring systems.
SPECIFICATIONS
- Shoring length: 2.27 m / 3.81 m
- Height of piling frame element: 1.00 m
- Pipe culvert length: 1.82 m / 3.35 m
- Insert depth: variable
- Box weight: 1,335 kg - 1,885 kg
- Shoring width: variable
ADVANTAGES
- Ideal for construction work with crossing pipelines
- Low-deformation shoring in urban areas
- Spindles identical with KRINGS boxes
- Can be used as corner shoring and for linear shoring
E+S PILING FRAME ELEMENT DKE 3.63 & 4.03.
The piling frame element is used as an adjustment and waling element for sheet piles. It is used in particular in areas that are heavily traversed by transverse pipelines and where large-area shoring cannot be used.
SPECIFICATIONS
- Shoring length: 3.63 m / 4.03 m
- Height of piling frame element: 1.00 m
- Pipe culvert length: 3.20 m / 3.60 m
- Insert depth: variable
- Box weight: 1,844 kg / 1,980 kg
- Shoring width: variable
KRINGS PILING FRAME ELEMENT DKU 5.80.
The KRINGS DKU 5.80 piling frame element is a supplement to the existing piling frame elements and is characterized in particular by its outstanding length of almost 6 meters.
Combined with supplementary components, the DKU 5.80 m offers a wide range of possible uses. The adapter slide rail enables use in E+S linear shoring as well as in corner slide rails. In addition, the corner shoring adapter can be used to create a closed four-sided shaft. Another installation variant is the direct lining up of the elements.
SPECIFICATIONS
- Shoring length: 5.80 m
- Height of piling frame element: 1.10 m
- Pipe culvert length: 5.44 m
- Insert depth: variable
- Box weight: 4,226 kg
- Shoring width: variable
ADVANTAGES
- Ideal for construction measures with crossing pipelines
- Wide range of applications:
- In box shoring
- In E+S linear shoring
- As corner shoring
- In rows
downloadcenter
reference projects